D-Link Support Publishing        BANYAN.TXT                      Feb. 1996

     D-Link DE-650CT PCMCIA Ethernet Card Installation for Banyan Vines

 Contents
 
        Introduction
        Requirements
        Minimum Skill Level
        Compatibility List
        Getting Started

 Introduction
 
        This installation assumes that the PCMCIA drivers are working properly.
        Please consult INST_DOS.TXT for help with PCMCIA Drivers.
        Getting Started will describe the installation for Banyan.

 Requirements
 
        A PCMCIA compatible Laptop
        A PCMCIA chipset that is PCIC compatible (Intel, Cirrus, Vadem, and
         VLSI) or Databook compatible.
        Banyan Vines V4.x(2) or higher
        A DE-650CT (our single media cards are not supported, 650T and 650C)
        A knowledge of basic DOS commands and editing text files

 Minimum Skill Level
 
        A knowledge of basic DOS commands
        A knowledge of editing text files
        A knowledge of DOS basic file structure (CONFIG.SYS and AUTOEXEC.BAT)
        A knowledge of the network driver configuration being used
        Please see Support Options if you are not comfortable will this
         skill level

 Compatibility List
 
        DE-650CT only (will not run with DE-650T or DE-650C)
        Removal of any present PCMCIA drivers
        For a laptop compatibility list please consult your local
         D-Link Branch Office

 Getting Started
 
    There are two methods of copying files from the Banyan VINES
    workstation to the bootable diskette or subdirectory on the hard
    disk.

    Method 1:
        Execute the 'INSTALL' command included in the diskette labeled
         "VINES MASTER DISK".
        Follow the given instructions for copying files.

    Method 2:
        Execute the 'BAN' command.
        Login to VINES system.
        Execute the 'PCCOPY' command.
        Select the 'NDIS Ethernet' option and follow the instructions for
         copying files.
        Insert the driver program diskette in Drive A and the prepared
         bootable diskette in Drive B. Then, copy the appropriate NDIS
         driver file DE65S.DOS from Drive A to Drive B or to the
         subdirectory of the hard disk.
        Create a CONFIG.SYS file with the following statements:

          DEVICE=PROTMAN.DOS /I:A:\
          DEVICE=DE65S.DOS

         NOTE:  A:\ is the path where Banyan VINES workstation files reside.

       Create a DE65S.NIF file containing the following statements:

         Model = D-Link DE-65S PCMCIA Ethernet Card
         Path = A:\
         DeviceDriver = DE65S.DOS
         DeviceName = DE65S$
         Type = NDIS

         NOTE:  A:\ is the path where Banyan VINES workstation files reside.

      Create a PROTOCOL.INI file with the following lines:

        [PROTOCOL MANAGER]
        drivername = PROTMAN$

        [VINES_XIF]
        drivername = NDISBAN$
        bindings = "DE65S"

        [DE65S]
        drivername = DE65S$

     Execute the 'PCCONFIG' command.

        A "CONFIGURING A PC FOR THE NETWORK" message appears on the
        screen. The program then provides some options you can select.

     Select "1 - Network Card Settings".

        Another screen appears for selecting some options.

     Select "NDIS Ethernet".

     Select the appropriate configuration of the adapter.

     After configuring the adapter, you return to the main screen.
      Select "2 - Login Environment Settings".

     From the next screen, select "NDIS Ethernet".

      The 'PCCONFIG.DB' file will then be created.

     Reboot your computer.

     Login to VINES by executing the 'BAN' command.

