D-Link Support Publishing       LANMAN.TXT                      Feb. 1996

     D-Link DE-650CT PCMCIA Ethernet Card Installation for MS Lan Manger

 Contents
 
        Introduction
        Requirements
        Minimum Skill Level
        Compatibility List
        Getting Started

 Introduction
 
        This installation assumes that the PCMCIA drivers are working properly.
        Please consult INST_DOS.TXT or INST_OS2.TXT for help with PCMCIA
        Drivers.
        Getting Started will describe the installation for Lan Manager.

 Requirements
 
        A PCMCIA compatible Laptop
        A PCMCIA chipset that is PCIC compatible (Intel, Cirrus, Vadem, and
                VLSI) or Databook compatible.
        Lan Manager 2.x/higher or Lan Manager 2.x/3.x for OS/2
        A DE-650CT (our single media cards are not supported, 650T and 650C)
        A knowledge of basic DOS commands and editing text files

 Minimum Skill Level
 
        A knowledge of basic DOS commands
        A knowledge of editing text files
        A knowledge of DOS basic file structure (CONFIG.SYS and AUTOEXEC.BAT)
        A knowledge of the network driver configuration being used
        Please see Support Options if you are not comfortable will this
         skill level

 Compatibility List
 
        DE-650CT only (will not run with DE-650T or DE-650C)
        Removal of any present PCMCIA drivers
        For a laptop compatibility list please consult your local
         D-Link Branch Office

 Getting Started
 
        The MS LAN Manager provides a SETUP.EXE program in the setup diskette
        for specifying a driver for the Ethernet adapter.

        To install a driver for DOS (see OS/2 below), follow these steps:

        If you are installing LAN Manager for the first time, answer "Yes"
         when prompted for the importation of additional network drivers.
         This prompt appears right after completion of the workstation
         installation.

        If LAN Manager is already installed in your hard disk, select "Add
         New Config" from the Configuration menu.  Then, select "Other Driver".

        Insert the driver diskette in Drive A and follow the instructions on
         the screen.  The SETUP program will copy the necessary NDIS driver
         programs from the driver diskette into your hard disk; that is, into
         the LAN Manager directory.

        After completion of SETUP, your CONFIG.SYS file will be modified to
         reflect the NDIS driver programs.

        Reboot your system to affect the changes.

     To install a driver for DOS (see OS/2 below), follow these steps:

        If you are installing LAN Manager for the first time, answer "Yes"
         when prompted for the importation of additional network drivers.
         This prompt appears right after completion of the workstation
         installation.

        If LAN Manager is already installed on your hard disk, select
         "Add New Config" from the Configuration menu.  Then, select
         "Other Driver".

        Insert the driver diskette in Drive A and follow the instructions
         on the screen.  The SETUP program will copy the necessary NDIS driver
         programs from the driver diskette into your hard disk.

        After completion of SETUP, your CONFIG.SYS file will be modified to
         reflect the NDIS driver programs.

        Reboot your system to affect the changes.

