D-Link Support Publishing        NW311.TXT                       Feb. 1996

                D-Link DE-650CT PCMCIA Ethernet Card Installation
                       for NetWare Server 3.11 Driver

 Contents
 
        Introduction
        Requirements
        Minimum Skill Level
        Compatibility List
        Getting Started

 Introduction
 
        This installation assumes that the PCMCIA drivers are working properly.
        Please consult INST_DOS.TXT for help with PCMCIA Drivers.
        Getting Started will describe the installation instructions.

 Requirements
 
        A PCMCIA compatible Laptop
        A PCMCIA chipset that is PCIC compatible (Intel, Cirrus, Vadem, and
         VLSI)
        Netware 3.11 Server Software
        A DE-650CT (our single media cards are not supported, 650T and 650C)
        A knowledge of basic DOS commands and editing text files

 Minimum Skill Level
 
        A knowledge of basic DOS commands
        A knowledge of editing text files
        A knowledge of DOS basic file structure (CONFIG.SYS and AUTOEXEC.BAT)
        A knowledge of the network driver configuration being used
        Please see Support Options if you are not comfortable will this
         skill level

 Compatibility List
 
        DE-650CT only (will not run with DE-650T or DE-650C)
        Removal of any present PCMCIA drivers
        For a laptop compatibility list please consult your local
         D-Link Branch Office

 Getting Started
 
        Copy the NWDE65S.LAN file from the <PATH>\nwde65s.lan directory
         into the subdirectory of your server.  Type:

         >copy <PATH>\nwde65s.lan  \NW311
          ; if nw311 is the server subdirectory
          ; <PATH> is the path where nwde65s.lan resides. If the autoinstall
          was used <PATH>=\NW311.

        Copy all provided NLM files into your server directory.  Type:

         >copy <PATH>\*.NLM  \NW311

        Run SERVER.EXE on the server.

        Edit the AUTOEXEC.NCF file as follows:

         :load install
         Select <System Option>
         Select <Edit Autoexec.NCF file>

        Modify the server's AUTOEXEC.NCF as follows:

         load C:\NW311\LSLENH.NLM
         load C:\NW311\PATCHMAN.NLM
         load C:\NW311\MSM.NLM
         load C:\NW311\ETHERTSM.NLM
         load C:\NW311\NWDE65S.LAN
         bind ipx to nwde65s net=xxxx  ;xxxx is the network # ie. 33

        Press Esc after editing.
        Select "Yes" to save.
        Select "Exit" to exit installation.
        Shut down the server and then turn it ON again.
        The driver is now installed and running.

