D-Link Support Publishing        NW4XX.TXT                       Feb. 1996

                 D-Link DE-650CT PCMCIA Ethernet Card Installation
                                for NetWare Server 4.x Driver

 Contents
 
        Introduction
        Requirements
        Minimum Skill Level
        Compatibility List
        Getting Started

 Introduction
 
        This installation assumes that the PCMCIA drivers are working properly.
        Please consult INST_DOS.TXT for help with PCMCIA Drivers.
        Getting Started will describe the installation instructions.

 Requirements
 
        A PCMCIA compatible Laptop
        A PCMCIA chipset that is PCIC compatible (Intel, Cirrus, Vadem, and
         VLSI)
        Netware 4.xx Server Software
        A DE-650CT (our single media cards are not supported, 650T and 650C)
        A knowledge of basic DOS commands and editing text files

 Minimum Skill Level
 
        A knowledge of basic DOS commands
        A knowledge of editing text files
        A knowledge of DOS basic file structure (CONFIG.SYS and AUTOEXEC.BAT)
        A knowledge of the network driver configuration being used
        Please see Support Options if you are not comfortable will this
         skill level

 Compatibility List
 
        DE-650CT only (will not run with DE-650T or DE-650C)
        Removal of any present PCMCIA drivers
        For a laptop compatibility list please consult your local
         D-Link Branch Office

 Getting Started
 

        Using the install menu (for NetWare 4.1 only
        for other version see below)
        
        Boot up the Novell Server.

        After booting up, execute "LOAD INSTALL".  Type:
         : load install

        Select "Driver Option" and then press Enter
        Select "Configure network drivers" and then press Enter
        Select "Select a driver" and then press Enter
        Press the Ins key to install an unlisted driver
        Press F3 to specify a different PATH (C:\SRV4X) and then press Enter
         <PATH> is the directory where nwde65s.lan resides
        Select "NWDE65S.LAN" and then copy the NWDE65S.lan file
        Set the adapter parameters, then select "Save parameters and load
         driver"
        From the Novell Server side, execute "load install".  Type:
         :load install
          Select <NCF files options>
          Select <Edit AUTOEXEC.NCF>
        Save the file to make modifications permenent

        Modifying an existing NetWare 4.x Server
        
        From any workstation, log in to the Novell server as a SUPERVISOR.
        Copy all provided NLM and LAN files into your server's SYSTEM directory

          >copy <PATH>\*.*   F:\SYSTEM
          <PATH> here is the directory where support NLMs and NWDE650S.LAN
          reside.

        From the Novell Server side, execute "load install".  Type:
         :load install
           Select <NCF files options>
           Select <Edit AUTOEXEC.NCF>
        Modify the server's AUTOEXEC.NCF file as follows.
         :load NWDE65S.LAN
           (msm.nlm and ethertsm.nlm will also be loaded when loading
            nwde65s.lan)
         :bind ipx to NWDE65S NET=xxxx
        Shut down the server and then turn it ON again.
        The driver is now installed and running.

