D-Link Support Publishing                                        Feb. 1996

               D-Link DE-650CT PCMCIA Ethernet Card Packet Driver
                           Installation Overview

 Contents
 
        Introduction
        User's Guide
        Driver Directory Structure
        Revision History
        Support Options
        Copyrights, Trademarks, and Disclaimers

 Introduction
 
        Packet drivers are general drivers used by many operating systems,
        especially TCP/IP software packages.  If the network system that is
        installed specifically mentions support for packet drivers, then
        it is likely that it will be able to the provided packet driver
        without problems.

        The most important thing to remember when installing packet drivers
        is the software interrupt vector.  The default interrupt vector for
        D-Link packet drivers is 0x62 hexadecimal.  Most network operating
        system supporting packet drivers will try to automatically search for
        packet drivers already loaded in the computer's memory.  However,
        some packages will require a provided interrupt vector for the packet
        driver.  Furthermore, some packages can only work with certain
        interrupt vectors. which require a software interrupt vector parameter
        when loading.  Please see the section at the end of this document for
        description on packet driver parameters.

        Since the DE-650CT PCMCIA Ethernet adapters are  software configurable,
        the packet driver will automatically detect the hardware parameters.
        If the packet driver can properly read the adapter's MAC address during
        loading, then the hardware is normally working properly.

 User's Guide
 
    DEVICE = DE65SPD.SYS [/option] <packet_int_no>
    DE65SPD.COM [/option] <packet_int_no>

        Packet Driver Parameters:

       <packet_int_no> is the software interrupt vector number used by the
                       packet driver program.  This can be from 96 to 128.

       [/option]        includes the following:

       /?              Show available parameters
       /d              Delay Initial - The driver program will not initialize
                       the network interface card until the packet driver
                       program is accessed by its upper layer program.
       /w              The -w parameter is for use only in the Windows
                       environment.
       /u              Unload the packet driver.
       /c              Assign card number for driver.
       /n              NetWare conversion. Convert 802.3 packets to 8137 packets
       /auto           Automatically detect connected media.
                       *This is the default setting for media type.
       /utp            Switch media type to UTP.
       /bnc            Switch media type to BNC.


 Driver Directory Structure
 
  DE650CT Diskette Release 02/01/96
   PKTDRV
    DE65SPD  COM             V3.00 .COM pkt driver
    DE65SPD  SYS             V3.00 .SYS pkt driver
    ETH      SYS             NFS support driver
    PDNFS    SYS             NFS support driver
    3SHARE   TXT             Text file
    DLKTCP   TXT             Text file
    PCNFS    TXT             Text file
    INST_DOS TXT             Text file
    README   TXT             Text file
    PCTCP    TXT             Text file

  Revision History
  
        Revision: No. 960201
        1. Update all DOS drivers. All DOS version drivers can auto-detect the
           I/O and IRQ. Drivers named DE65S.
        2. New added Diagnostics program
        3. Updated AutoInstall program from v1.0 to v2.0

  Support Options
  
  For technical support, you may contact your authorized D-Link distributor,
  dealer, or the following D-Link headquarters:

  In U.S.A.           Tel: +1(714)455-1688      Fax: +1(714)455-2521
                      BBS: +1(714)455-1779      BBS: +1(714)455-9616

  In Canada           Tel: +1(905)828-0260      Fax: +1(905)828-5669
                      BBS: +1(905)828-6673

  In U.K. & Europe    Tel: +44(181)235-5555     Fax: +44(181)235-5500
                      BBS: +44(181)235-5511

  In Germany          Tel: +49(6196)643011      Fax: +49(6196)28049
                      BBS: +49(6196)28378

  In Asia, Taiwan     Tel: +886(2)916-1600      Fax: +886(2)914-6299
                      BBS: +886(2)910-1835

  In France           Tel: +33(1)30238688       Fax: +33(1)3028689


  In Australia        Tel: +61(2)4177100        Fax: +61(2)4171077
                      BBS: +61(2)4173711

  In Nordic           Tel: +46(40)163330        Fax: +46(40)163340
                      BBS: +46(40)163343

  In Singapore        Tel: +657746233           Fax: +657746322
                      BBS: +657744787

  In China            Tel: +86(10)4934175       Fax: +86(10)4991648

  In Tokyo            Tel: +81(3)57512351       Fax: +81(3)57512352

  In India            Tel: +91(22)6172478       Fax: +91(22)6172476

  The BBS communication setup information is as follows :
      Speed     :  2400-14400 baud                           - Germany
                   2400-9600 baud                            - Asia,Taiwan
                   14400-16800 baud                          - Canada
                   9600-14400 baud V32, V32bis, V42, V42bis  - U.S.A.
                   2400-19200 baud V24, V32, V32bis, V42bis  - U.K. & Europe
      Parity    : none
      Data bits : 8
      Stop bit  : 1

 Copyrights, Trademarks, and Disclaimers
 
 A documents and DE-650 drivers are Copywritten to
 Copyright (c) 1996 by D-Link Corporation. All rights reserved.

 All references to MS, Windows, Win95, Windows 95, Windows NT, WinNT are
 rights reserved by Microsoft Corporation

 All references to Nvl., ODI, Netware, NW, IPX, IPXODI, and LSL are rights
 reserved by Novell Corporation

 Further rights reserved to their respective corporations

