====================================================================

 Dataplex Limitations

====================================================================
 Please note the following limitations before installing Dataplex
====================================================================
 
1. When a boot drive is selected to be the Target Drive in Advanced 
   Mode, the drive must be configured as MBR (Master Boot Record) 
   partitions.

2. If the selected Target drive has the Windows installation 
   (C:\Windows folder), then it must also have Windows System 
   Partition (100MB partition) on the same drive and vice-versa.

3. Multiple OSes are not supported. 

4. Only one cache drive is supported in a system.  

5. There cannot be two identical SSDs in the system, one of which 
   is to be used as cache. 

6. There is no support for RAID sets as the cache drive. 

7. If after uninstallation of Dataplex, the system is restored to a 
   prior state in which Dataplex was installed, Dataplex will be 
   started in a disabled state. 

8. The following configuration(s) are not supported:
   - NVIDIA storage controllers

====================================================================
 DISCLAIMER: NVELO may make changes to specification and product 
 descriptions at any time, without notice.

 (c) 2012 NVELO, Inc.  All rights reserved.          www.nvelo.com
====================================================================
